液環真空泵

大氣量，P2620

氣量14,100至22,400 ACFM（24,000至38,000 m3/h）

NASH P2620 液環真空泵型號可在整個真空范圍內快效運行，無需變動泵的內部構件。其氣量是我們產品組合中更大的，范圍從14,100至22,400 ACFM（24,000至38,000 m3/hr），P2620設計為在造紙、電力、采礦和化學加工業等苛刻環境中運行。

描述

真空能力

當NASH P2620真空泵配備中心護罩時，可以實現一機兩用，差別可達10 inHg (340 millibar)。這樣做的優點很明顯，因為可以減少使用的真空泵數量，從而節省了空間和安裝成本。

安裝靈活，運行噪音低

獨特的入口配置允許在頂部和側面布置入口，以適應低凈空安裝。底部和側面的排放連接提供了解決安裝空間限制的靈活性。大型檢查口可以方便地進入泵內進行檢查和維護。

P2620泵在運行期間非常安靜。即使是更大型的泵，聲級記錄也只有72至85 dB(A)（距離聲源3.3英尺（1米）處測量）。

專為要求苛刻的環境而設計

設計為在造紙、電力、采礦、制糖和化學加工業等苛刻環境中運行，這些泵以低運營成本提供耐用性和可行性。P2620真空泵泵體上的標準聚異戊二烯襯里可抵抗腐蝕性工藝氣體和液體，從而提供出色的耐腐蝕性。與同等無襯層泵相比，聚異戊二烯襯里消耗的能量也更少。

技術數據

?吸入流量：14,100至22,400 ACFM（24,000至38,000 m3/h）

?真空范圍：至4.7 inHgA（至160 mbar abs.）

?壓差： 至22 psi（至1.5 bar）

?軸密封：填料函（標準） 按要求的機械密封（單端/雙端）

?結構材料：提供鑄鐵，不銹鋼，不銹鋼復合和環氧樹脂涂層組件

Liquid Ring Vacuum Pump

Large Capacity, P2620

Capacity 14,000 to 21,800 ACFM (23,800 to 37,000 m3/h)

The NASH P2620 liquid ring vacuum pump model allows efficient operation over the entire vacuum range without the need to change the pump's internals. With the largest capacity in our portfolio, ranging from 14,000 to 21,800 ACFM (23,800 to 37,000 m3/h), the P2620 is designed to operate in demanding environments such as paper, power, mining, and chemical process industries.

Description

Split Vacuum Capability

When a NASH P2620 vacuum pump is equipped with a center shroud, split vacuum operation up to 10 inHg (340 millibars) differential can be achieved. The advantage of this is significant, allowing usage of fewer vacuum pumps - which saves space and installation costs.

Flexible Installation & Quiet Operation

The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. Bottom and side discharge connections offer flexibility to address installation space constraints. Large inspection ports allow easy access to pump internals for inspection and maintenance.

P2620 pumps are amazingly quiet during operation. Sound levels of 72 to 85 dB(A) (measured at a distance of 3.3 ft (1 meter) from the source) have been recorded for even the largest of the pump models.

Designed To Operate In Demanding Environments

Designed to operate in demanding environments like the paper, power, mining, sugar, and chemical process industries, these pumps offer durability and reliability at a low cost of operation. The standard polyisoprene lining on the P2620 vacuum pump body resists aggressive process gases and liquids to provide exceptional corrosion resistance. The polyisoprene lining also consumes less energy than the equivalent unlined pump.

Technical Data

Suction Capacity: 14,000 to 21,800 ACFM (23,800 to 37,000 m3/h)

Vacuum Range: to 4.7 inHgA (to 160 mbar abs.)

Differential Pressure: to 22 psi (to 1.5 bar)

Shaft Seals: Stuffing Box (standard), Mechanical Seals (single acting/ double acting) on request

Materials of Construction: Cast Iron, Stainless steel, Stainless steel clad and epoxy coated components are available